Applications

Monitoring of articles stored at very low temperatures such as in dry ice type environments, where a remote probe is beneficial.

Product Summary

The LogTag^® Low Temperature Remote Probe Recorder measures and stores up to 8000 temperature readings over -90 °C to +40 °C measurement range from associated interchangeable LogTag^® ST10 type remote probe temperature sensor (available in lengths up to 3 meters).

Intended for use in monitoring of articles stored at low temperatures such as in dry ice type environments.

Using the LogTag^® Interface and LogTag’s freely available companion software LogTag^® Analyzer, the LogTag^® is easily configured for recording conditions including delayed start, sampling interval, number of readings and configuration of conditions to activate the ALERT indicator.

Readings are downloaded using LogTag^® Analyzer which provides facilities for charting, zooming, listing data statistics and allows exporting the data to other applications such as Excel.

Please note: An interface is required for configuration and reporting

Product Highlights

• Alert indicator – indicates if readings are outside of preset limits
• OK indicator indicates if still recording and if readings within configured limits
• Inspection mark in log by push button
• Push Button Logging start
• Rapid Download! Takes only seconds to download recordings
• 'Pre-Start' logging - Logtag^® can be configured to record even if it has not been started.
• High performance at low cost
• Credit card sized case – thin enough to be easily mailed “letter rate”.
• Real time clock records time & temperature simultaneously
• Easy to use LogTag^®Analyzer software that runs on any PC configures LogTag^® for recording then downloads resulting data for analysis. Data can also be exported to formats compatible with other applications such as Excel
• Re-calibration to achieve higher accuracy possible
• High quality gold plated remote sensor connector
• Interchangeable Probes – LogTag^® remote temperature probes are interchangeable.

External Probes

Click here for all external probes at a glance

---

Technical Specifications

Part Order Code	TREL-8
Remote Probe Temperature Sensor measurement range (ST10 type only)	-90 ~ +40 °C
Recorder operating temperature range	-30 ~ +70 °C
Rated Temperature reading accuracy	Better than ±1 °C for -30 °C~ +20 °C better than ±1.2 °C for -45 °C~ -30 °C & +20 °C~+40 °C better than ±1.7 °C for -80 °C~-45 °C better than ±2.0 °C for -90 °C~-80 °C Ex-factory values with standard 1m LogTag® Supplied probe and with recorder case sitting in temperature 0 °C ~ 50 °C) Actual performance is normally much better than the rated values. Accuracy figures can be improved by recalibration.
Capacity	8000 temperature readings (16 Kbytes memory)
Sampling frequency	adjustable, 30 sec to several hours
Download Time	Typically with full memory in less than 5 seconds depending on computer or readout device used.
Power source	CR2450 3V LiMnO2 Battery (Fixed).
Battery life	Storage life of 1 year before ‘start’ (if it is hibernation mode), followed by: 2 – 3 years of normal use (based on 15 minute logging, download data monthly).
External Sensor Cable Length	Standard: 50 cm (Part# ST10S-05) Extended: 3 m (Part# ST10S-30)
External Sensor Cable Type	PTFE/FEP (FDA food contact rated) coaxial
Size	86 mm (H) x 54,5 mm (B) x 8,6 mm (T)
Weight	35 grams without ST100
Case Material	Polycarbonate
LogTag® Recorders reserves the right to change this product’s specifications without notice.