External Probes and Smart Probes

All external probes and smart probes at a glance

All external probes and smart probes at a glance

  • ST100 external probes with blue sheathing
  • ST10 external probes for low temperature loggers
  • Smart probes can be calibrated separately from the logger

Information about the wide range of external LogTag probes

How do I recognize an ST100 probe?...

Sensors in the ST100 series can be distinguished from sensors in other series by the blue sheathing at the plug end of the cable.

How do I recognize an ST10 probe?...

Sensors in the ST10 series can be distinguished from sensors in other series by the green sheathing at the plug end of the cable.

What are Smart Probes?

...

LogTag® Smart Probes are precise and reliable probes that can be calibrated separately from the logger.
They can be sent to a calibration laboratory for recalibration and the logger remains in place, ensuring continuous recording without interruption.

ST100 external probes

The ST100 probes with stainless steel probe tip (316) measure a temperature range from -40 °C to +99 °C .

Suitable for the following loggers: TREX-8, TRED30-16CP, UTRED-16F, UTRED30-16, UTRED30-WiFi

All sensors are equipped with a high-quality gold-plated MCX connector and an industrial-grade PTFE coaxial cable and are interchangeable while maintaining the specified accuracy. All materials including cable are FDA food safe (except ST100B).

...
ST100S - 30 mm probe length, ⌀5 mm

22 mm long stainless steel probe tip (316)

  • Cable length 1.5 m = article no. ST100S-15
  • Cable length 3.0 m = article no. ST100S-30
...
ST100K - 75 mm probe length, ⌀3.2 mm

65 mm long stainless steel probe tip (316)

  • Cable length 1.5 m = article no. ST100K-15
  • Cable length 3.0 m = article no. ST100K-30
...
ST100L - 100 mm probe length, ⌀3.2 mm

90 mm long stainless steel probe tip (316)

  • Cable length 1.5 m = article no. ST100L-15
  • Cable length 3.0 m = article no. ST100L-30
...
ST100J - 50 mm probe length, ⌀3.2 mm

40 mm long stainless steel probe tip (316)

  • Cable length 1.5 m = article no. ST100J-15
  • Cable length 3.0 m = article no. ST100J-30
...
ST100T - 140 mm probe length, ⌀5 mm

105 mm long stainless steel probe tip (316)

  • Cable length 1.5 m = article no. ST100T-15
  • Cable length 3.0 m = article no. ST100T-30
...
ST100H - 175 mm probe length, ⌀5 mm

105 mm long stainless steel probe tip (316)

  • Cable length 1.5 m = article no. ST100H-15
  • Cable length 3.0 m = article no. ST100H-30
...
ST100B - 24 mm probe length

Probe with non-encapsulated sensor without tip. Not food-safe and offers no protection against moisture.

  • Cable length 1.5 m = article no. ST100B-15
  • Cable length 3.0 m = article no. ST100B-30

STX-50 probe extension cable

The STX-50 is a 5 m long extension cable for all sensors in the ST100 and ST10 series.

The female end of the cable, which accepts the plug of the sensor (suitable for both ST100 and ST10 sensors), is fitted with a flexible sleeve that provides the connection point with IP61 protection when the sensor is plugged in.

-300x105.jpg
STX-50 - 5 m extension cable

28 mm sleeve length, intended as an extension for ST10 and ST100 series probes*

*Only one extension per logger

  • Logger-extension connection: IP61 (with vertically suspended logger)
  • Connection of the extension probes: IP61 (-46 °C to 74 °C)
  • Cable length 5 m = article no. STX-50

Only probes of the respective series may be used with the corresponding LogTag® data loggers; connecting other sensors may lead to measurement errors.

Note: Sensors of the ST100 series can be exchanged between the LogTag data loggers without recalibration and without affecting the specified nominal accuracy. However, if a particular combination of data logger and ST100 probe is calibrated to achieve a higher accuracy, this combination must remain paired for measurements or the higher accuracy cannot be guaranteed. In this case, the accuracy is not transferable to other data loggers or ST100.

ST10 external probes

The ST10 probes are suitable for the models TREL-8, TREL30-16CP, UTREL-16F, UTREL30-16, UTREL30-WiFi and measure a temperature range from -90 °C to +40 °C .

All sensors are equipped with a high-quality gold-plated MCX connector and an industrial-grade PTFE coaxial cable and are interchangeable while maintaining the specified accuracy. All materials including cable are FDA food safe (except ST100B).

...
ST10S - 30 mm probe length, ⌀5 mm

22 mm long stainless steel probe tip (316)

  • Cable length 0.5 m = article no. ST10S-05
  • Cable length 1.5 m = article no. ST10S-15
  • Cable length 3.0 m = article no. ST10S-30
...
ST10M - 73 mm probe length, ⌀5 mm

65 mm long stainless steel probe tip (316)

  • Cable length 1.5 m = article no. ST10M-15

STX-50 probe extension cable

The STX-50 is a 5 m long extension cable for all sensors in the ST100 and ST10 series.

The female end of the cable, which accepts the plug of the sensor (suitable for both ST100 and ST10 sensors), is fitted with a flexible sleeve that provides the connection point with IP61 protection when the sensor is plugged in.

-300x105.jpg
STX-50 - 5 m extension cable

28 mm sleeve length, intended as an extension for ST10 and ST100 series probes*

*Only one extension per logger

  • Logger-extension connection: IP61 (with vertically suspended logger)
  • Connection of the extension probes: IP61 (-46 °C to 74 °C)
  • Cable length 5 m = article no. STX-50

Only probes of the respective series may be used with the corresponding LogTag® data loggers; connecting other sensors may lead to measurement errors.

Note: Sensors of the ST10 series can be exchanged between the LogTag data loggers without recalibration and without affecting the specified nominal accuracy. However, if a particular combination of data logger and ST10 probe is calibrated to achieve a higher accuracy, this combination must remain paired for measurements or the higher accuracy cannot be guaranteed. In this case, the accuracy is not transferable to other data loggers or ST10.

Smart Probes

LogTag® offers both standard smart probes (-40 °C to +99 °C) and ultra-low temperature smart probes (-90 °C to +40 °C).

...
CP100 / CP110 - Standard Smart Probes (-40 °C to +99 °C)
  • CP100 Smart Probe is compatible with the UTRED30-16 dual-channel logger and the UTRED30-WiFi dual-channel logger
  • CP110 Smart Probe is compatible with the TRED30-16CP logger
  • Probe tip: IP68
    Probe tip/cable junction: IP64
    Signal conditioning: IP44
  • CR2032 3V LiMnO2 Battery (distributor-replaceable), 1 year storage, followed by 3 years of normal use (based on 5 minute logging)
...
CP10 / CP11 - Ultra-low temperature Smart Probes (-90 °C to +40 °C)
  • CP10 ultra-low temperature smart probe is compatible with UTREL30-16 dual-channel logger and UTREL30-WiFi dual-channel logger
  • CP11 Smart Probe is compatible with TREL30-16CP logger
  • Probe tip: IP68
    Probe tip/cable junction: IP64
    Signal conditioning: IP44
  • CR2032 3V LiMnO2 Battery (distributor-replaceable), 1 year storage, followed by 3 years of normal use (based on 5 minute logging)